AutoZero Touch Plate zoom

Hover

IMG_3731 zoom

Hover

AutoZero Touch Plate zoom

Hover

IMG_3719 zoom

Hover

IMG_3725 zoom

Hover

IMG_3594 zoom

Hover

IMG_3612 (1) zoom

Hover

AutoZero Touch Plate Cables 2 zoom

Hover

IMG_3573 (1) zoom

Hover

AutoZero Touch Plate zoom

Hover

IMG_3695 zoom

Hover

AutoZero Touch Plate Cables zoom

Hover

AutoZero Touch Plate 3 zoom

Hover

IMG_3693 (1) zoom

Hover

IMG_3689 zoom

Hover

AutoZero Touch Plate Cables 3 zoom

Hover

AutoZero Touch Plate Compatibility 1-3 zoom

Hover

AutoZero Touch Plate Compatibility 2-3 zoom

Hover

AutoZero Touch Plate Compatibility 3-3 zoom

Hover

AutoZero Touch Plate
IMG_3731
AutoZero Touch Plate
IMG_3719
IMG_3725
IMG_3594
IMG_3612 (1)
AutoZero Touch Plate Cables 2
IMG_3573 (1)
AutoZero Touch Plate
IMG_3695
AutoZero Touch Plate Cables
AutoZero Touch Plate 3
IMG_3693 (1)
IMG_3689
AutoZero Touch Plate Cables 3
AutoZero Touch Plate Compatibility 1-3
AutoZero Touch Plate Compatibility 2-3
AutoZero Touch Plate Compatibility 3-3
Full Screen

AutoZero Touch Plate

(294 customer reviews)

$87.99

The AutoZero Touch Plate is Sienci’s revolutionary CNC touch plate that allows for automatic zero-setting in all X, Y and Z directions, with both straight and irregularly shaped bits (v-bits, ball nose and tapered.)

Engineered by our team, the AutoZero allows for a fully streamlined probing experience:

  • Skip the process of measuring or assuming the tool size before probing
  • No more need to probe with a straight-edged bit to find zero before starting a 3D contour or v-carve
  • Corner cutout allows tool to go to zero to confirm successful probing

Unlike most conventional touch plates, the AutoZero’s unique chamfered-edge geometry, symmetry and tall walls allows it to automatically measure and calculate the size and position of the bit you’re using, with extreme accuracy. Plus, when combined with our gSender control software, users can run all functions through pre-built settings to have a seamless zeroing experience without having to mess around with custom macros.

***Read Description Below For More Highlights***

Description

Other highlights include:

  • Special nickel coating for higher surface conductivity to improve touch-off sensitivity
  • Each set comes with a 5ft cable with a strong neodymium magnet and gold plated 5mm ECS5 jack for easy connection to two spots on the touch plate
  • Guaranteed compatibility with our LongMill and AltMill CNCs, and likely compatible with other CNC routers with 2-wire, NO probe connections (like Shapeoko, 3018, etc.)
  • Works seamlessly out-of-the-box with the gSender CNC control software
  • Macros and documentation available for other senders too like CNCjs, LinuxCNC, Buildbotics, UGS, and more
  • Currently set up for Front, Left corner probing only – support for other options coming to gSender soon

Additional information

Weight .7 lbs
Dimensions 4 × 6 × 0.5 in
method-of-qualification

TRANSACTIONAL VALUE
origin-criterion

C
country

CA

Measurements

  • Shipping Dimensions: 203 x 152 x 51mm (8″ x 6″ x “)
  • Shipping Weight: 0.32kg (0.7 lb)

AutoZero Touch Plate

Recommended Add-ons & Accessories

FAQs

 

Warranty

Items such as our AutoZero Touch Plate are covered under our 60-day warranty. Learn more.

Help & Resources

 

294 reviews for AutoZero Touch Plate

4.6
Based on 294 reviews
5 star
76
76%
4 star
11
11%
3 star
6
6%
2 star
2
2%
1 star
3
3%

  1. Ed Nowicki (verified owner) –

    Excellent.

    (0) (0)

  2. Bryan (verified owner) –

    Works great and is accurate.

    (0) (0)

  3. Luis Rattia (verified owner) –

    Useful

    (0) (0)

  4. Daniel Jones (verified owner) –

    Works well , maybe you can change the software so it reverts to Z zero after using it in XYZ mode if you are not familiar with it and you just want to zero Z it moves fast and damage your tool or hurt yourself.

    (0) (0)

  5. David K. (verified owner) –

    this makes setup so much faster, easier and accurate

    (0) (0)

  6. Mike Mayo (verified owner) –

    After setting XYZ, the bit attempted to move in the wrong direction and struck the touch plate. I haven’t yet figured out what’s causing the issue.

    (0) (0)

  7. Law (verified owner) –

    Works perfectly every time and very reliable

    (0) (0)

  8. THOMAS MYERS (verified owner) –

    See above comments.

    (0) (0)

  9. DON ALDRIDGE (verified owner) –

    Same

    (0) (0)

  10. Jason Siegel (verified owner) –

    Looks easy

    (0) (0)

  11. Paul M. (verified owner) –

    I have been using the AutoZero touch plate for about 4 months and like how easily it sets my x&y zero and my z axis. I use it with gSender and with the Super Long Board controller that I upgraded my Genmitsu CNC to.

    (0) (0)

  12. Todd Lindstrom (verified owner) –

    Love this!!

    (0) (0)

  13. Finlay Wood (verified owner) –

    Simple, effective, accurate

    (0) (0)

  14. Peter C. (verified owner) –

    I use 1/8″ bits for final cut out. The sides of the plate are so high that I have to extend the bit so the collet nut does not contact the plate and give a false Z reading. This makes the bit prone to breakage.

    (0) (0)

  15. Bill Z. (verified owner) –

    Still waiting for my spindle, so haven’t used it yet.

    (0) (0)

  16. Andreas Litmanowitsch (verified owner) –

    great tool

    (0) (0)

  17. James Cavanaugh (verified owner) –

    haven’t used it yet

    (0) (0)

  18. Neil S. (verified owner) –

    This makes makes zeroing the Z axis a breeze. I use it for everything.

    (0) (0)

  19. David A. (verified owner) –

    While I did need a touch plate for the Z axis, this is a little over kill for how I use my machine. I ordered it because I knew I needed something

    (0) (0)

Only logged in customers who have purchased this product may leave a review.