Hover
Hover
$16.99
These 1/8″ Flat Compression End Mills offer the best of down cut and upcut bits, allowing for upcut flutes on the bottom part of your cut and down cut flutes on the top surface of your material.
They are excellent for projects that use materials prone to fuzziness or tear out, such as plywood and pine.
This item contains two compression end mills per package
484 in stock
| Material | Tip | # flutes | Flute type | Shank dia [mm] | Cutting dia [mm] | Length [mm] | Cutting length [mm] | Flute angle [°] | Helix angle [°] | Max. material cutting hardness |
| Solid carbide | Flat | 2 | Compression | 3.175 | 3.175 | 50 | 3mm upcut 10mm downcut |
0 | 30 | 45 |
| Weight | 0.05 lbs |
|---|---|
| Dimensions | 3.5 × .5 × .5 in |
| method-of-qualification | TRANSACTIONAL VALUE |
| origin-criterion | C |
| country | CA |
| Material | Tip | # flutes | Flute type | Shank dia [mm] | Cutting dia [mm] | Length [mm] | Cutting length [mm] | Flute angle [°] | Helix angle [°] | Max. material cutting hardness |
| Solid carbide | Flat | 2 | Compression | 3.175 | 3.175 | 50 | 3mm upcut 10mm downcut |
0 | 30 | 45 |
Consumables such as End Mills that have been opened or used are not covered under our 60-day warranty. Learn more.
Flat Compression bit in action